Abstract Suspension plasma spraying (SPS) enables the production of various coating microstructures with unique mechanical and thermal properties. Aeronautical manufacturers have been working for fifty years to improve the thermal barrier coating (TBC) performances in gas turbines. Commercial plasma torches with a segmented anode that are characterized by stable plasma jets should enable a better control of the TBC microstructure. The addition of diatomic gases such as hydrogen in the plasma-forming gas affects the plasma jet formation and causes some instabilities. However, it enhances the thermal conductivity of the gas flow, the plasma mass enthalpy and the heat transfer to particles. This study aims to characterise and describe the coating microstructure changes of yttria-stabilised zirconia when gradually adding hydrogen with argon into the plasma gas mixture. The effect of hydrogen is weighted out due to the gas mass enthalpy, mean velocity at the nozzle exit and “hot zone” length of the plasma jet. The coating microstructures, which depend on these plasma jet parameters, will be mapped from feathery and porous to dense and cracked deposits depending on the spraying conditions.